Shop By Category
Your Cart

03-12 Dodge 5.9+6.7L Cummins Dual Fleetguard Fuel Filter Kit

-THIS ITEM CANNOT BE EXPEDITED- STANDARD SHIPPING ONLY


The 03-12 Cummins trucks came with a 7 micron OEM fuel filter that is only about 60% efficient removing contaminants. That's right only 60% efficient! The inadequate filtration along with increasingly bad fuel, is why they are notorious for taking out injectors.

The injector manufacture for these engines recommend a minimum of 4 micron for ultimate protection. A 7 micron particle has been shown to be the main cause of accelerated pump and injector wear in these High Pressure Common Rails producing upwards of 29,000psi. These 7 micron particles blasting through your injectors at that kind of pressure results in premature failure, which can easily cost upwards of $5,000 in repair bills. In fact, OEM injectors are typically on backorder due to so many being sold worldwide.

We had the CAT 1R-0750 filter in our kits for over 10 years, because they are a great filter and are readily available. Now the CAT filters are considered an older filter-media technology compared to the advancement in filtration over the last several years. We have also seen fake knockoffs out there in the marketplace that can cause issues and leave you less protected. The newer NanoNet technology found in Fleetguard fuel filters is now the most up to date, advanced technology and superior protection you can get. The result of this Nanonet technology gives it a 2 micron rating at over 99.6% efficiency! Do your own research on these Fleetguard Nanonet filters. For the low cost and the easy availability, you will be pressed to find a better filter out there.


What does this mean to you? It means our kits, and a very simple 45-60 minute install can save you thousands of dollars in repair costs on your Dodge Cummins.

"It's very cheap insurance to protect your high-dollar investment....."

Our Cummins Dual-Filter Kit is for both better fuel and water filtration and is mounted nice and tight up to the cab, inside the frame rail utilizing the rear seat bolts on the drivers seat. This kit requires NO drilling or welding. You simply bolt this on over the frame rail to the rear seat bolts and connect the hoses to your stock fuel line using the supplied fittings. The kit includes everything in the picture below. The installation is very straight-forward and takes approximately 45-60 minutes to complete. The bracket is laser cut 3/16" steel and comes in a black, double powder-coated finish.

For instructions, please click here

Please note: These Cummins Dual Filter Kits were designed and produced for the 2003-2012 Dodge Cummins diesel trucks. The dual filter kit mounts at the rear of drivers door underneath on all style trucks. 

These Cummins Dual Filter Kits were designed and produced for the 2003-2012 Dodge Cummins diesel trucks. The dual filter kit mounts at the rear of drivers door underneath on all style trucks.

Returns are accepted within 30 days of purchase with a 25% restocking fee and our actual shipping charges taken out. All returns must be approved by phone and in resellable condition which means mounting bracket not scratched, parts clean and the plastic still on the filters.

Part Number: 0312FLTDFKIT

 
Lame California Prop 65 Notice