Cart is empty
DODGE 6.7L Commonrail Cummins Turbo Diesel (07.5-2012*)
2010+ C&C Not Supported.
This tuner is emissions delete capable.
Smarty CaTCHER Tuner
By Mads Electronics
Fast guide to Smarty’s special Features
*** Unlike the Smarty S06 for the 5.9L, the Smarty S67 is not untraceable
The horsepower settings. except #0, all other softwares have a
modified "Torque management" ( TQM ). The throttle response
is greatly improved but is set to a safe limit. With "Safe" I mean
safe for your tranny and rest of the driveline.
°°° Do not use for prolonged high speed runs! Speeds exceeding approx
105 mph can result in high exhaust gas temperatures and damage the
Diesel Particulate Filter (DPF) !!!
*** All even numbered softwares (2-4-6-8) without timing are to be used
for stacking with other after market power adding devices that also add
their own timing. NO additional timing has to be used with the odd
numbered softwares (1-3-5-7-9).
Severe engine damage will result !!!
Tested on stock trucks on our in house Dyno Dynamics Twin
Stock means just that. Stock! Even the air filters were stock...
We checked the "baseline" ( the stock truck Hp at the rear
wheels ) twice in a day in order to be sure about our findings.
The above declared HP numbers are all rounded down to the
closest number. For example the 90 Hp file actually did 96 Hp.
That's a 90 Hp software for me, not a 100. The 170 Hp was 176.
ABS / Speedo recalibration
The tire height can be adjusted up to 44" in increments of 10
tenth of an inch in just a couple seconds. Of course, Smarty
needs to be VIN# locked to the truck in order to get into the ABS
DTC Code reader
The name says it all.
You can read and erase codes. Codes are displayed also in
plain English. That's old news by now. Smarty S-03 was the first
one to provide that utility, others found the idea to be a good
( Smarty does erase ABS codes too but does not display them )
ECM update speed
Faster than anything else on the market! Again we've done our
homework on the protocol. Less than 5 minutes. Three times
faster than a Star-Scan diagnostic tool or competitor.
We have developed our own bootloader in order to not have to
pull fuses should an update become interrupted for any reason.
All you have to do is to turn the key off / key on Smarty does
everything else on it's own.
The CaTCHER softwares as they are today are only a starting
point. Expect major news in future. We’re for your feedback,
opinions, likes, dislikes...
We will make Smarty do what YOU want, TOGETHER.
Smarty has released the NEW 6.7L Tuning Software for the 2012 Dodge Cummins! All 6.7L 2010-2012 Cummins tuning software has been totally revised.
Also, now compatible with CAB & CHASSIS TRUCKS up to 2009 model year!
No posts found