Shop By Category
Your Cart

Misc Tools

Brand: Torque King Tools Part Number: TS1065
TS1065 5 Piece Ball Joint Press Set for 2000-2002 Dodge Ram 2500, Ram 3500 Dana 60 Front Axle works on all 2000, 2001, and 2002 Dodge Ram 2500 or 3500 4x4 trucks to replace factory and most replacement Ball Joints. The Dana 60 front axle on these Heavy-Duty Ram trucks has ball joints that are t..
$469.99
Brand: Torque King Tools Part Number: QK4846
QK4846 2nd Design Knuckle and Hub Seal Kit with QT1515 Installer (Old Kit number was QK4610S) Save $$ over buying individually priced QT1515 Seal Installer plus the seals and o-rings that need to be replaced anytime your 2003 to 2004 Ford Super Duty® or 2003 to 2005 Ford Exc..
$264.99
Brand: Alliant Power Part Number: AP0079
The Alliant Quick Release Coupler Tool has been specially designed for your 2003-2007 Ford 6.0L Powerstroke.  A must have in the toolbox of any Powerstroke Technician. Alliant part number: AP0079..
$35.92
Brand: XDP Mfg Part Number: XD263
Easily remove the injectors in your 2003-2007 Ford 6.0L Powerstroke with the XDP G2.8 Injector Connector Removal Tool XD263. This specially designed tool allows you to remove the electrical connectors on your injector harness without damage. A perfect addition for the toolbox of every 6.0L Power..
$19.95
Brand: XDP Mfg Part Number: XD367
The XDP quick Release Coupler Tool allows for easy removal of various oil and fuel line connections in your 2003-2007 Ford 6.0L Powerstroke. Not only does the Quick Release Coupler Tool save you time, it also eliminated the risk of damage to engine components by prying against them with improper too..
$19.95
Brand: Torque King Tools Part Number: TS1082
TS1082 Ball Joint Press Set for 2003-2013.5 Ram 2500 and Ram 3500 with Original Equipment Ball Joints This 7 Piece Ball Joint Press Set is specifically tailored to press out and press in original equipment American Axle Manufacturing (AAM) Ball Joints in your 2003 to 2013.5 heavy-duty Dodge or ..
$654.98
Brand: Torque King Tools Part Number: QK4678
QK4678 2005-2016 Ford F-250, F-350 Super Duty® Knuckle and Hub Seal Kit with Installer includes the original equipment seals, o-rings, and gaskets that MUST be replaced anytime the axle shafts are removed from your Super Duty® front axle plus one of our heavy-duty TS1530 Knuckle Seal ..
$253.73
Brand: Torque King Tools Part Number: TS1530
TS1530 Knuckle to Axle Shaft Seal Installer for 2005-up Ford Super Duty® F-250, F350 4x4 Trucks Use to install those easily damaged and expensive axle shaft to knuckle seals on your outer axle shaft. TS1530 is also used to correctly seat the seal and shaft assembly into the steering knuckle at ..
$175.46
Brand: DieselSite Part Number: PSPTOOL
For use on Dieselsite Overdrive Power Steering Pulley and other common engine pulleysIncludes: Puller Body, Jaw and Sleeve Assembly, Jack-screw, Button, Bearing and Washer, 2 Puller Pins, 2 Screw Installers5/8"-18, 3/8"-16 Screw SizeOne Year WarrantyPart number: PSPTOOL..
$29.00
Brand: Aftermarket Parts Part Number: CLA000315
These 304 stainless steel V-band clamps are designed for clamping exhaust components together.Please Note: By popular request, these clamps have been renumbered. These used to be our 4.0" clamps and were numbered based on outer diameter of the rings they were built to clamp. As of September 29 2008 ..
$20.00
Brand: Cummins Part Number: 3824500
Restore factory performance and function to the engine in your 1989-2018 Dodge 5.9L/6.7L Cummins with the Cummins 3824500 Crankshaft Wear Sleeve Installation Tool. Built from only the best quality materials, Cummins OE parts are a top choice for any diesel owner repairing their engine. The Wear Slee..
$151.37
Brand: Torque King Tools Part Number: TS6000
TS6000 Cummins Rear Crankshaft Seal Tool Set Quickly & easily replace that leaky rear crankshaft seal on your 1989-current Cummins 5.9L or 6.7L diesel engine without damaging your new seal! No need to remove the flywheel housing or seal adapter! Includes CNC machined aluminum inst..
$212.40
Brand: Alliant Power Part Number: AP0089
The Alliant Fan Clutch wrench kit eliminates the hassle in servicing the cooling fan clutch in your 1994-2015 Ford 7.3L/6.0L/6.4L/6.7L Powerstroke. This kit is a must have in the toolbox of any Powerstroke mechanic.Alliant part number: AP0089..
$245.54
Brand: Torque King Tools Part Number: TS4961
TS4961 7 Piece Ball Joint Tool Set for 1994-1999 Dodge Dana 60, 1980-2004 Ford Dana 50, and 1992-2004 Ford Dana 60 front axles.Also See TS4511 8 Piece Tool Set for 1994-1999 Dodge Dana 60, 1980-2005 Ford Dana 50, 1992-2004 Ford Dana 60, and 2005-up Ford Dana Super 60 Front Axles.Need ..
$527.86
Brand: Torque King Tools Part Number: TS4511
S4511 8 Piece Ball Joint Press Set for Dana Model 50 and 60 Axles Applications: The safest and most efficient way to replace the Ball Joints on your Ford or Dodge heavy-duty 3/4 ton or 1 ton 4x4 truck with a Dana 50 or Dana 60 front axle. Change your Ball Joints the easy and safe way! The seven, pre..
$644.48
Brand: Torque King Tools Part Number: QT1515
QT1515 Axle Shaft to Knuckle Seal Installer for Ford Excursion and 1999-2004 Ford Super Duty easily installs those fragile, expensive axle shaft to knuckle seals on your outer axle shaft and is also used to seat the seal and shaft assembly into the steering knuckle to the correct depth. This is..
$163.74
Brand: Torque King Tools Part Number: QK4610
QK4610 Type 1 Super Duty Knuckle Seal Kit includes our heavy-duty QT1515 Knuckle Seal Installer, plus 2 each QU40233 Unshielded Knuckle Seals, QU20023 wheel hub-to-knuckle O-Rings and QU20044 lockout hub O-Rings. Seal replacement is required anytime the a..
$201.23
Brand: Hamilton Cams Part Number: 07-C-BAR
Hamilton Cams Cummins Engine Barring ToolNever struggle to turn your engine over by the harmonic balancer bolts again, Save your valuable time and get the job done faster with one of these tools.Used on the below applications3.9L Cummins5.9L Cummins6.7L Cummins8.3L CumminsHamilton: 07-C-BAR..
$29.99
Brand: Longhorn Fab Shop Part Number: 201115
Professional Grade CV Cup Puller | Slide Hammer | Hardened 4140 JawsAt the worst possible time CV shafts snap and you find that the cup has frozen into the transmission or differential.  Prying on the case of the differential is either unsuccessful or results in breaking the case causing anothe..
$249.99
Brand: Longhorn Fab Shop Part Number: 201116
Professional Grade CV Cup Puller | Slide Hammer | Hardened 4140 Jaws | with Milwaukee PACKOUT caseAt the worst possible time CV shafts snap and you find that the cup has frozen into the transmission or differential.  Prying on the case of the differential is either unsuccessful or results in br..
$332.49
Brand: XDP Mfg Part Number: XD40128TC
Fits: Universal - M8 X 1.25Get your engine block ready to assemble with the XDP Thread Cleaning Chaser (M8x1.25) XD40128TC. An essential tool for anyone tearing their engine down, a thread chaser cleans the internally threaded holes in your engine block.Cleaning the threaded holes in your block is c..
$19.95
Brand: XDP Mfg Part Number: XD40127TC
Fits: Universal- M16 X 2.0 Use the XDP Thread Cleaning Chaser (M16x2.0) XD40127TC to get your engine block ready for assembly. An essential tool for anyone working on their engine, a thread chaser cleans the internally threaded holes on your engine block.Ensuring that threaded holes are clean i..
$19.95
Brand: XDP Mfg Part Number: XD40125TC
Fits: Universal- M12 X 1.75Prepare your engine block for re-assembly with the XDP Thread Cleaning Chaser (M12x1.75) XD40125TC. This is a must-have for anyone working on their engine. Cleaning threaded holes is crucial whether you're installing aftermarket head studs, main studs, factory-style bolts,..
$19.95
Brand: XDP Mfg Part Number: XD40124TC
Fits: Universal-M12 X 1.5Get your engine block ready for assembly with the XDP Thread Cleaning Chaser (M12x1.5) XD40124TC. A thread cleaning chaser is a must-have whether you're installing factory-style bolts, aftermarket head studs, main studs, or any other fasteners.A thread chaser works by cleani..
$19.95
Brand: XDP Mfg Part Number: XD40126TC
Fits: Universal- M14 X 2.0Get your engine block ready for assembly with the XDP Thread Cleaning Chaser (M14x2.0) XD40126TC from XDP. This is an essential tool for anyone working on their engine. Ensuring threaded holes are clean is crucial whether you're putting in head studs, main studs, factory bo..
$19.95
Showing 1 to 25 of 25 (1 Pages)