Pictures may not represent our most up-to-date wheel design Dual ball bearing Billet center section S400 based 4 blade boreless point ball milled wheel 96x88 or 102x92 turbine options The 96x88 turbine is available with a 1.25 T4, 1.15 T6, or 1.32 T6 exhaus..
Pictures may not represent our most up-to-date wheel design Dual ball bearing Billet center section S400 based 4 blade boreless point ball milled wheel 96x88 or 102x92 turbine options The 96x88 turbine is available with a 1.15 T6 or 1.32 T6 exhaust housings..
Universal Externally Wastegated T4 Lava Turbo Blanket. Fits most all T4 turbo exhaust housings and some T5/T6.
Thermal Zero turbo blankets go above and beyond when it comes to heat tolerance and durability. The inner layer of the turbo blanket can handle over 2500 degrees Fahrenheit of direct ..
Universal T6 turbo blanket. Fits most all T6 turbo exhaust housings including most all Marine applications and Detroit Diesel turbochargers. For most Borg Warner T6 S400 series please see part number TZ328511.
Thermal Zero turbo blankets go above and beyond when it comes to heat tolerance and ..
Universal Externally Wastegated T6 Lava Turbo Blanket. Fits most all T6 turbo exhaust housings including most all Marine applications of Detroit Diesel turbochargers. For Borg Warner T6 S400 series housings please see part number TZ328511-L.
Thermal Zero turbo blankets go above and beyond when it..
Fits most all T4 externally wastegated turbine housings
Thermal Zero turbo blankets go above and beyond when it comes to heat tolerance and durability. The inner layer of the turbo blanket can handle over 2500 degrees Fahrenheit of direct heat. The blankets are made with high quality 1 inch th..
Pictures may not represent our most up-to-date wheel design Dual ball bearing4 blade point ball milled compressor wheel9 blade turbine Available with a .91 or 1.0 A/R T4 exhaust housing. Please call for other exhaust housing options.0.71AR Race coverPlease call if you need a custom configuratio..
Schwitzer HT3B Turbo with a 26CM Turbine Housing with T6 Flange
Ideal for twins using a HX35 as the small charger!
Part number: 167049
There will be a 20% restocking fee on this turbo if you need to return it...
Drop in custom 3.0 smoothbore wheel and cover for s400 frame turbos, dyno proven design at a fraction of the cost of a complete turbo. Requires backing plate machining on frame sizes smaller than s480 turbos(can machine in house for $175). NTPA, PPL, OSTPA, BOB, USA East Legal...
This S467 from Fleece Performance is not your standard out-of-the box S467.7 from Borg Warner. Different in nearly every way than the common 67.7FMW, the Fleece Performance Cast S467 offers superb driving characteristics with enough air for more than 800 RHWP. Best suited for non-working, daily dri..
Please contact to confirm Reman option!!Schwitzer HT3B Turbo with a 26CM Divided Turbine Housing with T6 Flange
Ideal for twins using a HX35 as the small charger! Picture shows non-divided housing, this turbo has a DIVIDED housing.
Model: HT3BPart number 167050.
There will be a 20% restocking fee..
This is a 'Box' style turbo that will plug to work in the 2.5 pulling classPart Number: CTS465.T4-2.5 This works well for the beginner with other competition level chargers available!(Borg Warner cast wheel, box unit turbo)2.55 plug rule with .150 MAPS46583mm Exhaust WheelT-4Option of 1.00, 1.1..
Billet Air Shut Off Guillotine with Velocity Stack for sled pulling applications. Dual internal spring design utilizing a 1/4 inch thick aluminum blade. It includes set screw or weld-on flange and genuine Cummins v-bands.
THE BILLET AIR SHUT OFF GUILLOTINE WITH VELOCITY STACK INCLUDES:
Billet a..
Our dyno proven design is a blend of top end performance, mid range capability, and overall reliability. Utilizing our custom designed oversized bronze 360* thrust bearing, HD journal bearings, and 96mm and 1.32 t6 turbine standard. 1.25 T4 turbine housing available for $250 extra. Please call if ne..
Billet Air Shut Off Guillotine for sled pulling applications. Dual internal spring design utilizing a 1/4in thick aluminum blade. Includes set screw or weld-on flange and genuine Cummins v-band.
Included:
Billet air shutoff
Custom turbo cover adapter
Genuine Cummins v..
Billet Air Shut Off Guillotine for sled pulling applications. Dual internal spring design utilizing a 1/4in thick aluminum blade. Includes set screw or weld-on flange and genuine Cummins v-band.
Included:
Billet air shutoff
Custom turbo cover adapter
Genuine Cummins v-band clamps
Pa..
Billet Air Shut Off Guillotine with Velocity Stack for sled pulling applications. Dual internal spring design utilizing a 1/4 inch thick aluminum blade. It includes set screw or weld-on flange and genuine Cummins v-bands.
THE BILLET AIR SHUT OFF GUILLOTINE WITH VELOCITY STACK INCLUDES: ..
This is the 2013-2015 Cummins 6.7L Silver Bullet 64 install kit. (WILL NOT FIT 2013 2500)Click Here for 2013 2500 Cummins.
This kit is designed by Industrial Injection as the best single turbo upgrade for the 6.7L Cummins diesel truck. We have tested all different size turbos and believe this setup..
This is the 2013 (2500 ONLY) Cummins 6.7L Silver Bullet 64 install kit.This kit is designed by Industrial Injection as the best single turbo upgrade for the 6.7L Cummins diesel truck. We have tested all different size turbos and believe this setup will get you the best results on a stock truck. We h..
The Industrial Injection 6.7L Cummins s400 2nd Gen Turbo Swap Kit is a great setup for someone looking for more reliability and performance out of their vehicle. This is a complete kit that comes with everything needed for a nice clean install. Injector upgrades are recommended to help increase spoo..
DISCONTINUEDThis kit will allow you to install an S300SXE based Turbo on your 2010-2012 6.7 Cummins with an ATS or Steed Speed 2nd Gen Style Exhaust Manifold (Sold Separate). Kit includes all components needed to install the turbo. We mount the manifold pointing up which allows for a quick and simpl..
DISCONTINUED
This kit will allow you to install an S400 based Turbo on your 2010-2012 6.7 Cummins with an ATS or Steed Speed 2nd Gen Style Exhaust Manifold (Sold Separate). Kit includes all components needed to install turbo. We mount the manifold pointing up which allows for a quick and simple d..
DISCONTINUEDThis kit will allow you to install an S300SXE based Turbo on your 2013-2018 6.7 Cummins with an ATS or Steed Speed 2nd Gen Style Exhaust Manifold (Sold Separate). Kit includes all components needed to install the turbo. We mount the manifold pointing up which allows for a quick and simpl..
DISCONTINUEDThis kit will allow you to install an S400 based Turbo on your 2013-2018 6.7 Cummins with an ATS or Steed Speed 2nd Gen Style Exhaust Manifold (Sold Separate). Kit includes all components needed to install turbo. We mount the manifold pointing up which allows for a quick and simple down..
DISCONTINUED (7-27-23)Billet Wheel
S475
83mm Exhaust Wheel
T-4
option of .90 or 1.10 exhaust housing
Part number: CTS475.T4.83
Please allow 3-5 day build time before turbo ships...