This kit has all the necessary hardware for your stock or performance HE300 turbo install to help prevent leaks and to replace older studs that are prone to future breakage. Kits includes gaskets, studs and required hardware.FEATURESOE quality componentsComplete kit, no additional parts requiredINST..
The Industrial Injection High Flow 90° Cast Elbow was designed and tested to out perform and out flow the competition. This precision casted and machined 90° cast elbow was built to attach to any s300 style turbocharger that has a v-band outlet. Our high flow elbow utilizes a large 3″ OD outlet for ..
The Industrial Injection High Flow 90° Cast Elbow was designed and tested to out perform and out flow the competition. This precision casted and machined 90° cast elbow was built to attach to any s300 style turbocharger that has a v-band outlet. Our high flow elbow utilizes a large 3″ OD outlet for ..
The Industrial Injection K27 Exhaust Outlet Elbow is a stock replacement elbow for your 1992-2002 Cummins trucks with v-banded 5 bolt flange. After years of weathered abuse the factory cast elbows that connect between your turbo and downpipe become rotted out and break bolts, causing exhaust leaks r..
Includes ELBOW only.
Cummins Part#4035834
Mopar Part#5161570AA
This elbow will fit on 2003-2004 trucks as long as you use a 04.5-07 down pipe.
Many people use this as an upgrade on 03-04 trucks as the stock elbow has a 3.5 inch ID outlet and this one has a 4 inch ID outlet...
Get the most versatile turbo mounting kit for your 1994-2007 Dodge 5.9L Cummins with the BD-Power 1045983 Turbocharger Mounting Kit. This kit includes all the gaskets, O-rings, studs, nuts and washers you need mount a new turbo or reinstall your old turbo into your truck.
Features:
OE Quality..
T4-T3 Adapter Flange
With T4 sized turbine housings, there is no performance advantage to changing the exhaust manifold to match... So, why go to the expense? Our adapter flange makes for an inexpensive alternative to replacing the manifold and allows for quicker changes back and forth from T4 to T..
This black 1.0in T4 Pedestal Spacer is designed for use with T4 Turbos installed on Duramax engines when an extra inch of elevation out of the valley is required, although it could be used in any T4 application.
NOTE: A T4 gasket should be used on the top and bottom of the spacer to provide a prop..
This black ceramic coated 1.5in T4 Pedestal Spacer is designed for use with T4 Turbos installed on Duramax engines when an extra inch of elevation out of the valley is required, although it could be used in any T4 application.
NOTE: A T4 gasket should be used on the top and bottom of the spacer to ..
T3 Spacer Plate1" thick, divided spacer. Machined from mild steel. Mounting holes are non-threaded.Thread size is M10 x 1.5 when ordering the mounting hardware option.
Stainless Diesel part number: T3SP..
STAINLESS DIESEL T4 manifold - T3 turbo ADAPTER kit. 1" thick steel.
Comes with T3 gasket
Comes with T4 gasket
Comes with all mounting hardware
*waste-gate port is an option*
Stainless Diesel part number: T4_T3ADK..
T4 Spacer Plate1" thick, divided spacer. Machined from mild steel. Mounting holes are non-threaded.Thread size is M10 x 1.5 when ordering the mounting hardware option.
Stainless Diesel part number: T4SP..
This is a non-returnable part. Limited Stock Available. While Supplies Last.Laser Cut - Spacer plate between exhaust manifold and turbo. This plate is 1/2" steel. This comes with holes for mounting. New extended length studs are required and gaskets. Some turbo applications may require ..
1/2" thick to prevent warping
5.6 x 4.5 x 0.5 inches
T3 Turbo Inlet Flange w/tapped holes (1/2" thick)Made from Mild Steel
Note: Also works with T3/T4, GT30R and GT30/GT40 turbochargers
Warranty: Six Month Limited Warranty
Vibrant Performance part number: 14310..
Fits Cummins 24 valve common rail HE351CW turbo exhaust outlet flange.Mild steel flange CNC made by Keating Machine.
Available in 3, 3.5, or 4 inch. 4 inch representation is the last image above (number 3)...
This flange clamps to the back of the HE351 turbo and allows you to weld a 4 inch pipe on it. This flange is 4 3/8" OD
3rd Gen HE351 FlangeUsed on 3rd Gen S300's4 3/8th's ODFor use with 4" Downpipes3.50" pipe will fit on the inside of the flangeMild steel weld flange..
This will butt up to the exhaust outlet v-band flange on H1C & HX35 turbos (maybe some S200s as well), it is
Dimensions:
1.6" long x 2.90OD" x 3.1" Flange OD
Genuine OEM Cummins: 3910990...
3" V-Clamp style flange fits the 1989 -1998 H1C & HX35 turbo outlet. The OD of the opposite end slips into a 4" OD tube. (Same flange used on our 1989-1993 Dodge 1st Gen style 4" downpipe.)
**PLEASE BE ADVISED THERE ARE NO RETURNS ON TWIN TURBO PARTS. NO EXCEPTIONS** ..
Vulcan's steel HX40 flanges are machined to allow use of 3.5 in. or 4 in. OD tubing. Will mate up to your HX40 or aftermarket S300 variants with HX40 style exhaust housings. Great for those building a custom compound set or down pipe...
Fit T6 exhaust inlet flange. Flange is 3D profliled, CNC machined in-house to maximize air flow. Available for 3", 3.5" round ID schedule 40 sizes. Weldable mild steel.Fits most HC5A,HX80,HX82,HX83,S400,& T18A turbochargers. 4" flange is available for $85.00 also, it is pictured as as separate i..
Aluminum S300 compressor v-band outlet flange. Works with 3" pipe & 2.5" pipe.
This will also work on HX35 & H1C turbos that utilize a v-band compressor outlet.
Please Note:
Aluminum option is weld on.
O-Ring is included with flange.
..
HX40 4" Flange
Used on 2nd Gen S300's
4" OD
For use with 4" Downpipes
3.5" pipe will fit on the inside of flange
Mild steel weld flange
**Add a Clamp in the option
Stainless Diesel part number: FHX40-413..
Fits the S300 Cast Iron Exhaust Housing.Spacer plate that allows more total flow through the internal wastegate to more accurately regulate boost on a single turbo application.In a Twin or Compound turbo application it allows more total flow to the primary or 'large' turbo to help achive split perce..
STAINLESS DIESEL T3 manifold - T4 turbo ADAPTER kit. 1" thick steel.
Comes with T3 gasket
Comes with T4 gasket
Comes with all mounting hardware
Stainless Diesel part number: T3_T4ADK..
3rd Gen HE351 Flange
Used on 3rd Gen S300's
4 3/8th's OD
For use with 4" Downpipes
3.5" pipe will fit on the inside of flange
Mild steel weld flange
**Add a Clamp in the option**
Stainless Diesel part number: FHE351_4-3/8-450..
This is a non-returnable partHx40 Flange, Sleeve will fit inside 4" exhaust tubing. This is made from steel. This will work with S300 turbos that are machined with an Hx40 style flange. Will require Hx40 V-clamp #0405 to clamp together. **PLEASE BE ADVISED THERE ARE NO RETURNS ON TWIN TURBO PAR..
CNC'd T-6 Mild Steel Flange. Best flowing T-6 to round pipe flange you will find! Works with 4" & 3.5" pipe Stainless Diesel uses them when building their Hot PipesThey also use them in their Twin Turbo Piping Kits *Better than others who try to use a cheap rectangle flange and then..
HT3B V-Band flange that will weld to a 5" downpipe.
V-Band Flanged also included, though not pictured.
Works with T6 Housing.
Fleetguard PN: FLTEC50VBS
Cummins PN: 186918..