Pure Diesel Power, your number 1 diesel performance parts source!

Pure Diesel Power Price Match

live chat service provider

PDP Phone Number

PDP Email Signup

Shop By Brands all1-9ABCDEFGHIJKLMNOPQRSTUVWXYZ

Free shipping on all orders over $150! Free Shipping on orders over $150! *Exclusions Apply

Solid Steel LTD 3rd Gen Style Adjustable Trackbar 94-02 4x4

Solid Steel LTD 3rd Gen Style Adjustable Trackbar 94-02 4x4


 

$315.00

DAT3029402-4
+

Solid Steel LTD 3rd Gen Style Adjustable Trackbar 94-02 4x4

REQUIRES PURCHASE OF THE 2nd GEN to 3rd GEN TRACK-BAR RETROFIT KIT FOR USE ON 94-02 TRUCKS.

This Adjustable Track Bar is fully adjustable from stock length to 4 inches longer, and it can be adjusted right on the truck to ease the process of centering the axle exactly. Just install the bar and turn the adjusting sleeve till the axle is centered, it's that simple.

Solid Steel Industries LTD. in conjunction with a chemist and a rubber bushing manufacturer have designed a high quality rubber bushing that is better than the OEM bushings on the 2003 and up Trackbars. Using high quality rubber bushings provides smooth quiet operation, with little or no vibration sent back to the steering wheel or elsewhere on the truck. The hardness of the rubber bushing eliminates the spongy feeling found in other, softer, rubber bushings, while still providing the right amount of deflection to reduce wear and hammering. These bushings do not hammer and wear out like steel rod ends, Heim joints, and urethane bushings.

The Adjustable Track Bar will work on 03-07 trucks with lifts up to 3 inches. When used with the Trackbar retrofit kit can be used on 1994-2002 Dodge Rams.

Features:

  • Made in Canada.
  • Straight bolt-on installation on most trucks.
  • All mounting hardware is supplied.
  • Durable powder-coated finish.
  • Does not interfere with the popular "Mag-Hytec" differential cover.

 

  • DAT3029402-4 fits 1994 to 2002 2500 and 3500 4x4 ( Adjustable )
  • DAT3029402-4 fits 1994 to 2001 1500 4x4 ( Adjustable )

No posts found

Related Products

DSS0019402-4

The popular "DSS" steering stabilizer will greatly reduce steering "wander" on your late model Dodge pickup. This unit will serve to eliminate sector shaft play in the steering box which is a large contributor to wandering and poor road feel. It also serves to minimize frame flex at the steering box mounting point.

First check all your steering components. Loose ball joints, tie-rod ends or trackbar obviously must be replaced. Poor wheel alignment must also be corrected. A steering box that has a loose sector shaft is often an overlooked cause of poor steering.

Features:
* Made in Canada.
* Straight bolt-on installation. No drilling or welding.
* All mounting hardware is supplied.
* Durable powder-coated finish.
* NTN® bearing is easily replaced if necessary.
* Compatible with most lift kits. There are some exceptions, however. If your lift kit has drop brackets for the anti-sway bar AND there is a tube between these brackets, then there will be interference.

ATTN Borgeson Steering box owners: Some modification (slotting) is required to use this item with a Borgeson upgraded steering box.

Fits:
1994 to 2002 Dodge 2500 and 3500 4x4, 1994 to 2001 1500 4x4

+

TBK2029402-4

This trackbar retrofit kit will allow you to utilize a 2003 and up factory Dodge trackbar on your '94 to '02 Dodge RAM pickup. The '03 bar uses a rubber bushing on both ends, thus eliminating the frequent failure of the tie-rod style upper joint on your original trackbar.

The trackbar used on the 1994 to 2002 trucks has a rubber bushing on the lower (axle) end and a ball joint on the upper (frame) end. This ball joint is much the same as a tie-rod end in design. Due to a combination of factors, this ball joint normally experiences fairly rapid wear. For the 2003 model year, Dodge has switched to a trackbar that uses a rubber bushing on both ends. Trackbar wear on the newer trucks (as well as other makes that use a rubber bushed bar) is no longer an issue.

Kit includes bracket and mounting hardware. Does not include a trackbar. Trackbars sold separately.

Click here to see one installed

Features:

  • Made in Canada.
  • Straight bolt-on installation on most trucks.
  • All mounting hardware is supplied.
  • Durable powder-coated finish.
  • Laser cut, CNC bent.
  • Does not interfere with the popular "Mag-Hytec" differential cover.
Fits:
  • TBK2029402-4 fits 1994 to 2002 2500 and 3500 4x4, 1994 to 2001 1500 4x4

+
 

Customers Also Bought

 

Specials

 
Up