When installing a bottom sump with your AirDog or Fass Pump most trucks end up with an open fuel supply and or return line. G & R Diesel's 1/2" or 3/8" aluminum plug will cap off these lines with ease, to keep fuel from seeping out of them and dirt from getting into your fuel tank. You no longer hav..
The perfect addon to maximize fuel delivery and customization when installing an aftermarket fuel system. Avoid the common quarter tank issues typically seen with the in-tank draw straws used with lift pumps such as Fass, Airdog and many others. No Limit Fabrication: SUMP..
Pushlock billet aluminum construction and made by Glacier Diesel Power in the USA. 1/2" line size and tapped for 1/8" pressure senders. Great way to gain access for fuel pressure reading on your custom fuel system...
Pushlock billet aluminum construction and made by Glacier Diesel Power in the USA. 3/8" line size and tapped for 1/8" pressure senders. Great way to gain access for fuel pressure reading on your custom fuel system...
One of the most critical parts of your truck is it's fuel system! Do not just let your FASS or AirDog hang down from your frame and be exposed to road, tire, and field hazards! We have created a completely new mounting system for your FASS or AirDog that compliments an already great fuel system.
..
Replacement Bosch OEM fuel rail for '13-'18, 6.7L Dodge Cummins 2500 & 3500 PICKUPS only. Does not fit cab & chassis applications.Includes rail pressure sensor and fuel pressure limiting valve.This is the same rail that you'd get from Cummins or your Mopar dealer. Bosch is the OEM manufactur..
The XDP Fuel Tank Sump with Built-In Fuel Return XD243 provides you with a perfect option to maximize fuel delivery, and customization when installing your aftermarket fuel system. Avoid the common 1/4 tank issues associated with in-tank draw straws used with fuel systems such as AirDog, FASS and ma..
The Fleece Performance Cummins PowerFlo 750 CP3 is a straight forward, no inflated numbers, CP3 upgrade proven to support 750 RWHP with the proper complimenting modifications. Not only will it support 750 RWHP, but it also eliminates the factory fuel flow restriction that begins at 3,000 RPM. If you..
HIGH PERFORMANCE - HIGH FLOW
BULLET PROOF
12MM X 1.5 BANJO BOLT with a pair of sealing washers.
We search the diesel forums looking for problems that could be solved with a new product. One complaint that caught our attention is the poor quality of high flow banjo bolts on the market. Guys are s..
Upgrade your fuel system with this fuel filter delete from Fleece Performance Engineering. If you have an aftermarket fuel filtration system such as an Air Dog or a FASS, your factory fuel filter is no longer necessary. The factory fuel filter only becomes an extra restriction and an eye sore. This ..
6.7L Bosch Connector Tube Set
Includes:6 ea. New Bosch 6.7L Connector Tubes
Cummins part number: 2872288, replaces part number 2872395Replaces Mopar- 5175565ACBosch: F00RJ01831..
2007.5-2018 Dodge Ram 6.7L Cummins Diesel Bosch Connector Tube Also known as high pressure crossover tube. We recommend replacing these if you are installing new injectors.
Includes:1 injector tube with o-ring6 needed per engine. Bosch: F00RC00647Replaces:Cummins part number: 2872395, 2872393, 287..
Dodge 07.5-18 6.7L: Brand New set of OEM connector tubes that have been modified for added fuel delivery to the injector. Intended for applications 900 RWHP and greater.Includes new O-rings. Not recommended for street use.Details:Liter: 6.7Engine: CumminsYears: 2007.5-2018Fuel Type: DieselCondition:..
Rail Pressure Sensor for 2013-2018 Ram 6.7L Cummins Diesel.
Fits pickup and Cab & Chassis trucks.
Number 7 in image only.
Part number 4306993Replaces Mopar: 68210175AA & Bosch F00RL01029 / F 00R L01 029..
Replace your plastic OEM fuel cap (or non-existent cap) with this stylish billet anodized fuel cap. It comes with a double o-ring seal to ensure a tight fit and keep contaminants out of your fuel tank. It also has an integrated neodymium magnet to allow you to attach it to your fuel door while you p..
DISCONTINUED- PLEASE SEE THIS ALTERNATE PART- CLICK HEREThis Fitting Can be Used for the 24 Valve Cylinder Head Fuel Return and Injection Pump Fuel Return.
Specs: M12 x 3/8" Push-Lock Barb
Material: Steel
Style: Push-Lock Banjo Barb Fitting..
Fits all 2007 - 2018 Dodge Ram 6.7L Cummins Pickup AND Cab & ChassisAlso fits 04.5-2010 GM 6.6L Duramax Diesel trucks (instructions not included for this application)The OEM fuel pressure relief valve is designed to relieve pressure once the fuel rail gets above 27,000 psi. Some aftermarket tuni..
Industrial Injection CP3 Stg. 1 BOP (Bag of Parts) kit for 2007.5-2018 Dodge 6.7L Cummins
The stage 1 For the 6.7 Cummins, "Do it yourself" kit is good for 15% more volume. The kit is built with new components and are modified using the EDM process. This kit can be installed without removing the CP..
The Fleece Performance CP3K is a modified Cummins CP3 designed to eliminate the factory fuel flow restriction that begins at 3,000 RPM. If you have a stock CP3 pump you are losing fuel flow and rail pressure after 3000 RPM, which correlates to lost horsepower when you need it most. This cost effecti..
Upgrade your fuel system with this fuel distribution block from Fleece Performance Engineering. If you have an aftermarket fuel filtration system such as an Air Dog® or a FASS® and dual CP3 pumps, this fuel distribution block will allow you to get rid of your unnecessary factory fuel filter and give..
07.5+ Dodge 6.7L Cummins Diesel Reman .120 High Flow Fuel Connector Tubes
Includes new o-rings.
Recommended if you have a modified or dual cp3 setup.
$200.00 Core Charge to be refunded upon receipt of your stock connector tubes.Customer is responsible for return freight of connector tubes.
PLEA..
This is a New Bosch CP3 modified for increased volume. This pump is capable of supporting 1200+hp in a single pump application. All pumps are bench tested after assembly to ensure the highest quality on the market!
Pumps are built from stock replacement CP3 pumps. They are fully tested to 180 Mpa a..
Finally a way to increase flow and access fuel pressure on the 2010 thru 2018 6.7L applications.Dodge/Cummins almost got it right this time. The new top loading filter canisters used on the 2010 thru 2015 6.7L trucks now have molded in connectors. While they did a good job by stepping up the caniste..
This kit is designed to be installed with our 2010-2018 Cummins Fuel Distribution Block (FPE-FFD-RF-4G). It comes complete with all of the high quality AN fittings and push lock hose needed to cleanly plumb your dual CP3s with our Fuel Distribution Block.Kit Contents:
(2) Push Lock CP..
Keep contaminants from getting in the fuel tank of your 2013-2018 Ram 6.7L Cummins and 2014-2016 Ram 3.0L EcoDiesel Pickup with the XDP Anodized Billet Aluminum Dodge Fuel Fill Cap XD197. RAM's engineers decided to do away with the fuel filler cap on the late model trucks, claiming that the fuel doo..
Dodge 07.5-18 6.7L: Brand New 12mm STROKER CP3 pump sold with no core charge. This pump is capable of supporting over 1,000 RWHP with proper supporting modifications. Full fuel delivery to 6,000 RPM. New OEM unmodified FCA for improved tunability.For maximum fuel delivery, we recommend a 200 GPH (or..
Patriot Diesel Fuel Plug - Dodge RAM 2013-2018 6.7L / 2014-2016 3.0L ECOFeatures:
Plug cap-less fuel filler neck
Anodized billet aluminum
O-ring ensures a tight fit prevents contaminates entering your fuel tank
Magnetized base allows attachment to prevent loss when fueling
No assembly require..
Bosch OE Reman High Pressure Common Rail Injection Pump CP3 for Dodge Ram 6.7L Cummins 2007.5-2018When your hard working 6.7L Cummins engine needs a new fuel pump, it deserves the OE pump to be put back into the engine to ensure a long life ahead of it. Bosch was the original OE supplier for t..
Replace the restrictive factory line from the fuel filter housing to the injection pump on your 2010-2018 Dodge Ram 6.7L Cummins with the Fleece FPE-HFFL-1018 High Flow Feed Line Kit. This big 1/2" line increases fuel flow to your CP3 and includes a 1/2" quick disconnect feed fitting and CP3 fitting..
This Dual High Pressure Fuel Kit will allow you to feed your 07-18 6.7L Cummins the fuel it needs to see those big horsepower gains!Fits all 2007 - 2018 6.7L Cummins
You must use an aftermarket lift pump with this product. AirDog and FASS are the two most commonly used.
This product may not work..
Fits all 07-18 Dodge 6.7L CumminsThis is a BRAND NEW Bosch OEM Replacement CP3 for the 2007-2018 6.7L Cummins. This includes the FCA (Fuel Control Actuator) but does not include any fittings or hardware. Comes in a factory sealed Bosch box.No Core RequiredH&S Motorsports part number: 211001..
The Titan 4030213 Spare Tire Auxiliary Fuel System (STAFS) puts an additional 30 gallons of fuel at your fingertips. In most cases, this can even double the fuel capacity of your truck! This innovative system is designed to repurpose the space commonly used to stow a vehicles spare tire. Its underbo..
This Dual High Pressure Fuel Kit will allow you to feed your 07-18 6.7L Cummins the fuel it needs to see those big horsepower gains!Fits all 2007 - 2018 6.7L Cummins
You must use an aftermarket lift pump with this product. AirDog and FASS are the two most commonly used.
This product may not work..