Shop By Category
Your Cart

06-10 GM 6.6L Duramax Diesel Spearco Intercooler Upgrade

New intercooler for 2006-2010 Duramax diesel trucks!

Turbonetics/Spearco direct bolt-on high performance upgrade intercooler kits features the same W.A.V.E. Technology as used in all the other high horsepower race cars.

Turbonetic/Spearco use the largest intercoolers you can fit without any modification or cutting to the vehicle. All factory mounting brackets are retained and used. Computer modeled end tank and air inlet/outlet designs provide maximum boost pressure distribution, thus increasing cooling efficiency and dramatically reducing pressure drop.

The W.A.V.E. Technology core is capable of dropping temperatures by as much as 220 degrees F.

Kits include all heavy duty T-Bolt clamps and silicone hose needed for installation 

(THIS INTERCOOLER WILL DELETE THE LARGE PLASTIC ELBOW WITH THE WIRE E CLIP ON THE PASSENGER SIDE INTERCOOLER TUBE. IF THE PICKUP DOES NOT HAVE THIS STYLE BOOT, USE PART NUMBER 2-486) 

This intercooler system reduces charge air temperature entering the engine, increasing the air density for increased power and torque, while reducing the overall thermal load on the engine and cooling system as exhaust temperature is reduced as much as 150 degrees F. 

This results in less transfer of heat to the cooling system and assists in maintaining normal coolant temperature on long hard pulls towing high gross weight vehicles. 
Since the intercooler is mounted between the ³frame rail² below and behind the bumper there is no impact on the engine cooling system.

Air traveling beneath the vehicle is trapped between the road and the bottom of the intercooler, which gives the intercooler excellent performance even at low vehicle speed. *150+ degree EGT drop *scrub instake air temps 300+ degrees inlet to outlet

Spearco: 2-487 

WRITE A REVIEW

 

Please login or register to review

 
Lame California Prop 65 Notice